Hi Chrristos,
Looking at SEWAT manual you can use PMWIN to prepare your data files.
However, you will have to make small modifications/adjustments to some
of the input files (they are all in ASCII text format) outside PMWIN
using a text editor. Once you have done this you will have to run SEAWAT
from the DOS window. On the completion of the run you will be able to
read simulation results using PMWIN again. Remember that SEWAT will give
you simulated heads as equivalent freshwater heads. You will have to
convert those to the "field" heads using a formula shown in SEAWAT
manual. This formula converts heads using simulated fresh water heads
and concentrations. Conversion will have to be done outside SEAWAT/PMWIN
(e.g. in a spreadsheet) but once it is done and saved as an matrix you
will be able to read it into PMWIN and export it from there as an image
or dxf file.
Cheers
Bron

-----Original Message-----
From: chrristos miriounis [mailto:cmiriounis@...]
Sent: Wednesday, 26 January 2005 6:03 PM
To: seawat@...
Subject: [seawat] seawat to pmwin 5.3


Hi everybody
I would like to know if I can work SEAWAT with PMWIN 5.3
Also I would like to know if PMWIN 5.3 can be a graphical interface of
SEAWAT and if so how


---------------------------------
Do you Yahoo!?
Yahoo! Search presents - Jib Jab's 'Second Term'

[Non-text portions of this message have been removed]



=================================================
* To subscribe this group, send a blank email to:
seawat-subscribe@...

* Post message: seawat@...
=================================================
Yahoo! Groups Links